|
Home
>> Linear
Actuators >> Dental Chair Linear Actuator
DENTAL CHAIR Linear Actuator
(AT Series)
AT Series
Linear Actuators (Linear Actuator) are widely used in Adjustable beds, Medical beds, Wheel
chairs, Patient hoists, Table height adjustments, Industry
mechanical instruments and so on.
Specification
of AT Series Linear actuators:
◇ Max. Thrust 8000N, Max. Pull 5000N
◇ Voltage of AT Linear Actuator: 24VDC or 12VDC, Permanent Magnet Motor
Drive
◇ Chrome Plated Piston Rod eye with
slot
◇ High Strength Plastic Housing and
Gears
◇ Elegant and compact design with small installation
size
◇ Standard protection class: IP 54
◇ Built-in integral limit switch, not adjustable after
leaving factory
◇ Scratch and wear-resistant powder
◇ Painting on outer tube Φ30mm
◇ Stainless Steel Back Fixture
◇ Strong wear and corrosion resistant stainless steel inner
rod
◇ Standard Stroke of linear actuator: 100/150/200/250/300/350/400 mm, special
stroke are available according to customer'
requirement.
◇ Duty cycle: 10%, comment: 2 minutes continuous work
followed by 18 minutes rest
◇ Ambient temperature -5°C (23F) to +40°C
(104F)
◇ Low noise design, dB<48(A); The inspection method is in
accordance with DS/EN ISO3746 while linear actuator is
unloaded.
◇ Overload protection
◇ CE Certificated Linear Actuator
◇ Availability in Black, White and Blue
housing.
Standard Stroke of Linear Actuator and Min. Install Dimension
|
Standard Stroke
mm |
<110 |
150 |
200 |
250 |
300 |
350 |
400 |
|
Min. Install Dimension
mm |
AT-4000N
AT-6000N |
>285 |
325 |
375 |
425 |
475 |
525 |
575 |
|
AT-8000N |
>325 |
325 |
375 |
425 |
475 |
525 |
575 |
Technical Specification of Linear Actuator
|
Item No. |
Max. Thrust
(N) |
Max. Pull
(N) |
Self-Lock
(N) |
Speed (mm/s) |
Duty Cycle
(min/h) |
Current at full load(A) |
|
Full load |
No load |
|
AT-4000N |
4000 |
3000 |
4000 |
5 |
6.5 |
6 |
3.3 |
|
AT-6000N |
6000 |
3000 |
6000 |
4.2 |
6.2 |
6 |
3.8 |
|
AT-8000N |
8000 |
5000 |
6000 |
5 |
6.5 |
6 |
6 |
|
