|
Home
>> Linear
Actuators >> Block-Prevent Linear Actuator
Block-prevent Linear Actuator
(AT Series)
Block-Prevent
Linear Actuators (Linear Motor, Linear Motors) are built-in clutch. When the drive pole retract, the
clutch will loose automatically if meeting resistance
to prevent hand being squeezed.
Specification of
Block-Prevent Linear actuators
(Linear Motor,
Linear Motors)
:
Item No.: BP2000
2000N Item No.: BP4000 4000N
Item No.: BP6000
6000N Item No.: BP8000 8000N
◇ Max. Thrust of
Linear Motor, Linear Motors:
2000N, 4000N, 6000N, 8000N
◇ Voltage
of Linear Motor,
Linear Motors:24VDC or
12VDC,
Permanent Magnet Motor Drive
◇ Standard stroke
of Linear Motor,
Linear Motors:
50 ~ 350 mm, special stroke are
available
according to customer' requirement.
◇ When the drive
pole retract, the clutch will loose automatically if meeting
resistance
to prevent hand being squeezed.
◇ Duty cycle
of Linear Motor,
Linear Motors:10%
◇ Ambient
temperature -5°C (23F) to +40°C (104F)
◇ Standard
protection class
of Linear Motor,
Linear Motors: IP 51
◇ Built-in integral
limit switch, not adjustable after leaving factory
◇ High strength
plastic housing
◇ Zinc alloy back
fixture
◇ Low noise design,
dB<48(A); The inspection method is in accordance with DS/EN ISO3746 while linear
actuator is unloaded.
◇ Overload
protection
◇ CE Certificated
of Linear Motor,
Linear Motors
|
